ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. B004PKWC03
      *a Lock
      *b Open
      *c

      Component without harness connected

      (Engine Hood Courtesy Switch (Hood Lock Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A9-1 (E) - A9-2 (+) Open 10 kΩ or higher
      A9-1 (E) - A9-2 (+) Locked Below 1 Ω

      If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).