IMMOBILISER SYSTEM, Diagnostic DTC:B279C95

DTC Code DTC Name
B279C95 Engine Immobiliser System Incorrect Assembly

DESCRIPTION

If a hybrid vehicle control ECU that is incompatible with the immobiliser system is installed, the hybrid vehicle control ECU will store this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B279C95 Engine Immobiliser System Incorrect Assembly A hybrid vehicle control ECU that is incompatible with the immobiliser system is installed (1-trip detection logic*). Hybrid vehicle control ECU

DTC output confirmation operation:


  • Check for DTCs.

Vehicle Condition and Fail-safe Function when Malfunction Detected
Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
Hybrid control system cannot be started -
Related Data List and Active Test
DTC No. Data List and Active Test
B279C95 -

CAUTION / NOTICE / HINT

Note


  • When using the GTS with the power switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry&Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

  • After performing repairs, confirm that no DTCs are output by performing "DTC Output Confirmation Operation."

  • When replacing the hybrid vehicle control ECU, refer to Service Bulletin.

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs.

      Click here


      Powertrain > Hybrid Control > Clear DTCs
      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Check for DTCs.

      Click here


      Powertrain > Hybrid Control > Trouble Codes

      Tech Tips

      Before checking for DTCs, perform the "DTC Output Confirmation Operation" procedure.

      OK
      B279C95 is not output.
      Result
      Result Proceed to
      DTC B279C95 is not output A
      DTC B279C95 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

  3. REPLACE CURRENT HYBRID VEHICLE CONTROL ECU WITH PROPER HYBRID VEHICLE CONTROL ECU


    1. Replace the current hybrid vehicle control ECU with a proper hybrid vehicle control ECU.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END