AUXILIARY BATTERY INSTALLATION

PROCEDURE


  1. INSTALL AUXILIARY BATTERY


    1. Install the battery insulator to the auxiliary battery.

    2. Install the auxiliary battery.

    3. A01VBJ0

      Set the No. 2 battery clamp as shown in the illustration.

    4. Install the bolt.

      Torque:
      15.4 N*m  { 157 kgf*cm, 11 ft.*lbf }

    5. Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.

      Torque:
      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

    6. Engage the 2 claws to close the battery terminal cap.

  2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


    1. Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here