TELEVISION CAMERA REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear television camera assembly (w/ Parking assist monitor system) Parking assist monitor system initialization Parking assist monitor system

Click here

PROCEDURE


  1. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  2. REMOVE REAR TELEVISION CAMERA ASSEMBLY


    1. A01RKXN

      Disconnect the connector.

    2. A01RJ08

      Remove the 2 screws.

    3. A01RJZYC02
      B004PI4 Remove in this Direction

      Disengage the 2 guides to remove the rear television camera assembly as shown in the illustration.