QUARTER GARNISH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE QUARTER PILLAR COVER SUB-ASSEMBLY

    Tech Tips

    When removing the quarter pillar cover sub-assembly, heat the vehicle body and quarter pillar cover sub-assembly using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Quarter Pillar Cover Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or quarter pillar cover sub-assembly excessively.


    1. Using a heat light, heat the quarter pillar cover sub-assembly.

    2. B004OXZC01
      *a Double-sided Tape
      B004PI4 Remove in this Direction

      Disengage the 6 clips and separate the double-sided tape as shown in the illustration to remove the quarter pillar cover sub-assembly.