WINDSHIELD OUTSIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 3 WINDSHIELD OUTSIDE MOULDING CLIP

   Tech Tips

   Perform the following procedure only when replacement of a No. 3 windshield outside moulding clip is necessary.

   
   

   1. 

      Using a riveter with a nose piece, install 5 new No. 3 windshield outside moulding clips.

      Tech Tips

      If the mandrel of the No. 3 windshield outside moulding clip does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.

      Note

      
      

      • Do not pry the No. 3 windshield outside moulding clip with the riveter, as this will cause damage to the riveter and mandrel.

      
      

      • 

        *a	Riveter
        *b	Incorrect

        Confirm that the No. 3 windshield outside moulding clips are seated properly against the vehicle body.

      
      

      • Do not tilt the riveter when installing the No. 3 windshield outside moulding clip to the vehicle body.

      

      *a	Riveter
      *b	Mandrel
      *c	Incorrect

   2. Install the windshield glass sub-assembly.

      Click here

2. INSTALL NO. 1 WINDSHIELD OUTSIDE MOULDING CLIP

   Tech Tips

   Perform the following procedure only when replacement of a No. 1 windshield outside moulding clip is necessary.

   
   

   1. Engage the 5 claws as shown in the illustration to install 5 new No. 1 windshield outside moulding clips.

      

      Install in this Direction

      -

      -

3. INSTALL NO. 2 WINDSHIELD OUTSIDE MOULDING CLIP

   Tech Tips

   Perform the following procedure only when replacement of a No. 2 windshield outside moulding clip is necessary.

   
   

   1. 

      Install in this Direction

      Engage the clip as shown in the illustration to install a new No. 2 windshield outside moulding clip.

4. INSTALL WINDSHIELD OUTSIDE MOULDING

   
   

   1. Engage the guide.

   2. 

      Engage the 12 claws to install the windshield outside moulding.