GRILLE SHUTTER INSTALLATION

PROCEDURE


  1. INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (for Type A)


    1. A01RKG4C01
      B004PI4 Install in this Direction

      Engage the 2 guides as shown in the illustration.

    2. Install the radiator shutter sub-assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Engage the clamp.

    4. Connect the connector.

  2. INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (for Type B)


    1. A01RKG4C01
      B004PI4 Install in this Direction

      Engage the 2 guides as shown in the illustration.

    2. Install the radiator shutter sub-assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Engage the 2 clamps.

    4. Connect the connector.

  3. INSTALL THERMISTOR ASSEMBLY

    Click here

  4. INSTALL LOWER FRONT BUMPER ABSORBER

    Click here

  5. INSTALL FRONT BUMPER ENERGY ABSORBER (for Type A)

    Click here

  6. INSTALL FRONT BUMPER ENERGY ABSORBER (for Type B)

    Click here

  7. INSTALL FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT LH (for Type B)

    Click here

  8. INSTALL FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT RH (for Type B)

    Tech Tips

    Use the same procedure for the LH side.

  9. INSTALL FRONT BUMPER ASSEMBLY

    Click here