NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates, heat the vehicle body, back door outside garnish and name plates using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)

  • Back Door Outside Garnish

  • Name Plate

 20 to 30°C (68 to 86°F)

CAUTION:


  • Do not touch the heat light and heated parts, touching the heat light may result in burns.

  • Touching heated parts for a long time may result in burns.

B004QKGC23
*a Heated Part
*b Heat Light

Note

Do not heat the vehicle body, back door outside garnish or name plate excessively.

PROCEDURE


  1. INSTALL SIDE PANEL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new side panel emblem.

    3. Remove the release paper from the side panel emblem.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. for LH Side:


      1. Install the side panel emblem as shown in the illustration.

        B004QNON01
        Standard Measurement
        Area Measurement Area Measurement
        A 133.9 mm (5.27 in.) B 95.5 mm (3.76 in.)

    5. for RH Side:


      1. Install the side panel emblem as shown in the illustration.

        B004OJDN01
        Standard Measurement
        Area Measurement Area Measurement
        A 95.1 mm (3.74 in.) B 136.2 mm (5.36 in.)

  2. INSTALL BACK DOOR ORNAMENT SUB-ASSEMBLY


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new back door ornament sub-assembly.

    3. Remove the release paper from the back door ornament sub-assembly.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Engage the 2 pins and install the back door ornament sub-assembly as shown in the illustration.

      A01VCY7

  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 3 luggage compartment door plate.

    3. Remove the release paper from the No. 3 luggage compartment door plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 3 luggage compartment door plate as shown in the illustration.

      B004QWPC01
      *a Edge of Curved Surface *b Profile of Back Door Outside Garnish
      Standard Measurement
      Area Measurement Area Measurement
      A 105.6 mm (4.16 in.) B 100.9 mm (3.97 in.)
      C 235.6 mm (9.28 in.) D 97.9 mm (3.85 in.)

  4. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 1 back door name plate.

    3. Remove the release paper from the No. 1 back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 1 back door name plate as shown in the illustration.

      B004PMYC01
      *a Edge of Curved Surface *b Profile of Back Door Outside Garnish
      Standard Measurement
      Area Measurement Area Measurement
      A 32.5 mm (1.28 in.) B 146.1 mm (5.75 in.)
      C 18.4 mm (0.724 in.) D 18 mm (0.709 in.)

  5. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    for HYBRID Plate:


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 2 luggage compartment door name plate.

    3. Remove the release paper from the No. 2 luggage compartment door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 2 luggage compartment door name plate as shown in the illustration.

      B004QF5C01
      *a Edge of Curved Surface *b Profile of Back Door Outside Garnish
      Standard Measurement
      Area Measurement Area Measurement
      A 98.5 mm (3.88 in.) B 231.9 mm (9.13 in.)
      C 103.3 mm (4.07 in.) D 102.3 mm (4.03 in.)

  6. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    for PRIUS Plate:


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 2 luggage compartment door name plate.

    3. Remove the release paper from the No. 2 luggage compartment door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 2 luggage compartment door name plate as shown in the illustration.

      B004QPTC01
      *a Edge of Curved Surface *b Profile of Back Door Outside Garnish
      Standard Measurement
      Area Measurement Area Measurement
      A 95.7 mm (3.77 in.) B 238.9 mm (9.41 in.)
      C 103.7 mm (4.08 in.) D 104.1 mm (4.10 in.)