PROCEDURE
INSTALL RADIO SETTING CONDENSER
Engage the claw to install a new terminal cover to the wire harness.
Note
Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.
Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.
Do not use excessive force when inserting the wire harness into the terminal cover.
If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.
Engage the 3 claws to install the new terminal cover with wire harness to a new condenser.
Note
Do not use excessive force when inserting the terminal cover into the condenser.
If the terminal cover has been deformed during installation, replace the terminal, terminal cover and condenser with new ones.
Engage the clamp to temporarily install a new radio setting condenser with wire harness.
Install the new radio setting condenser with the bolt.
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
INSTALL NO. 1 TONNEAU COVER HOLDER CAP (for LH Side)
INSTALL TONNEAU COVER HOOK A (for LH Side)
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)
INSTALL REAR SEAT SIDE GARNISH LH
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH
INSTALL REAR UNDER SIDE COVER LH
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR SEAT CUSHION LOCK HOOK
INSTALL REAR SEAT CUSHION ASSEMBLY
INSTALL REAR SEATBACK ASSEMBLY LH
CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
INSTALL REAR DECK TRIM COVER
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)
INSTALL DECK TRIM SERVICE HOLE COVER
INSTALL DECK FLOOR BOX LH (w/o Spare Tire)
INSTALL DECK FLOOR BOX LH (w/ Compact Spare Tire)
INSTALL REAR DECK FLOOR BOX (w/ Compact Spare Tire)
INSTALL DECK FLOOR BOX LH (w/ Full Size Spare Tire)
INSTALL DECK FLOOR BOX RH (w/ Full Size Spare Tire)
INSTALL DECK BOARD RETAINER
INSTALL REAR NO. 1 FLOOR BOARD
INSTALL TONNEAU COVER ASSEMBLY