REAR DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR SPEAKER ASSEMBLY (for 6 Speakers)


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. B004PV1C81
      *A for RH
      *B for LH
      *a

      Component without harness connected

      (Rear Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      for RH
      Tester Connection Condition Specified Condition
      K4-1 - K4-2 Always 3.2 to 4.8 Ω
      Standard Resistance
      for LH
      Tester Connection Condition Specified Condition
      L5-1 - L5-2 Always 3.2 to 4.8 Ω

      If the result is not as specified, replace the speaker.

  2. INSPECT REAR SPEAKER ASSEMBLY (for 10 Speakers)


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

      Tech Tips

      Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.