STEERING PAD SWITCH INSTALLATION

PROCEDURE


  1. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. A01RKNJ

      Engage the 6 claws and 4 pins to install the steering pad switch assembly.

    2. A01RJNG

      Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }
    3. A01RJFI

      Connect 2 connectors to the spiral cable with sensor sub-assembly.

  2. INSTALL HORN BUTTON ASSEMBLY

    Click here