FRONT DRIVE SHAFT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. B004QG5

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. B004OOIN01

      Check whether each drive shaft dimension (A) is within specification.

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A): LH Side
      Specified Condition
      581.2 mm
      1.91 ft.
      Dimension (A): RH Side
      Specified Condition
      880.2 mm
      2.89 ft.