DRIVING SUPPORT BUZZER INSPECTION

PROCEDURE


  1. INSPECT SKID CONTROL BUZZER


    1. B004P6ON06

      Make sure that there is no looseness in the locking part and connecting part of the connector.

    2. Disconnect the skid control buzzer connector.

    3. Check the connector and terminals for deformation and corrosion.

      OK
      No deformation or corrosion.

    4. Connect a positive (+) lead from the battery to terminal 2, and a negative (-) lead to terminal 1 of the skid control buzzer, and check that the buzzer sounds.

      OK
      Tester Connection Specified Condition

      F41-2 (IG1) - Auxiliary battery positive (+)

      F41-1 (BZ) - Auxiliary battery negative (-)

      		 Buzzer sounds

      If the result is not as specified, replace the skid control buzzer.