ELECTRONIC SHIFT LEVER SYSTEM DTC CHECK / CLEAR

CHECK FOR DTCS

Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Powertrain > Hybrid Control > Trouble Codes
Check for DTCs and freeze frame data, and then write them down.

Check the details of the DTCs.

Tech Tips

Displayed Item	Description
Confirmed (Current DTC)	DTCs that indicate malfunctions
Pending (Pending DTC)	DTCs that indicate temporary malfunctions Existence of malfunction has not been confirmed but there is a possibility

Both Confirmed (Current DTC) and Pending (Pending DTC) record freeze frame data.

CHECK FREEZE FRAME DATA
1. If a DTC is present, select it in order to display its freeze frame data.
2. Read the freeze frame data recorded when the DTC was stored.
CHECK FOR DTCS (CAN BUS CHECK)
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: CAN Bus Check.
  
  CAN Bus Check
5. Check for CAN communication system DTCs.
  
  Tech Tips
  
  If any CAN communication system DTCs are output, perform troubleshooting for the CAN communication system first.
  
  Click here
CHECK FOR DTCS (SYSTEMS EXCEPT HYBRID VEHICLE CONTROL ECU)

Tech Tips

The hybrid vehicle control ECU maintains communication with other ECUs, including the ECM. Therefore, if the hybrid vehicle control ECU outputs a DTC, it is necessary to check and record the DTCs of all systems.
1. If DTCs are present, check the relevant systems.
  
  Tech Tips
  
  If DTCs for the CAN communication system are present in addition to other DTCs, first troubleshoot and repair any malfunctions in the CAN communication system.
CLEAR DTCS

Note

Clearing the DTCs will also clear the freeze frame data.
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
  
  Powertrain > Hybrid Control > Clear DTCs
5. Clear the DTCs and freeze frame data.