SIMPLE INTELLIGENT PARKING ASSIST SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SIMPLE INTELLIGENT PARKING ASSIST SYSTEM


    1. Customizing with the GTS.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the TOYOTA parking assist-sensor system on.

      4. Turn the GTS on.

      5. Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Utility / Customize Setting.

      6. Select the setting by referring to the table below.


        Others
        Tester Display Description Default Setting ECU
        IPA Avoidance Distance Simple intelligent parking assist avoidance distance setting Standard 00:Short,01:Standard,10:Long,11:Max Clearance warning ECU assembly
        IPA Perpendicular Parking Control Area Simple intelligent parking assist perpendicular parking range setting Middle 00:Small,01:Middle,10:Large,11:Max Clearance warning ECU assembly
        IPA Parallel Parking Control Area Simple intelligent parking assist parallel parking range setting Middle 00:Small,01:Middle,10:Large,11:Max Clearance warning ECU assembly