FUEL PUMP(w/o Canister Pump Module) REASSEMBLY

PROCEDURE


  1. INSTALL FUEL PUMP WITH FILTER ASSEMBLY

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel pump with filter assembly.

    Click here


    1. A01RK2ZC03
      *1 O-ring
      *2 Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump with filter assembly.

    2. Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump with filter assembly.

    3. Engage the 5 claws to install the fuel pump with filter assembly to the fuel filter.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

    4. Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.

    5. Engage the 2 claws and install the fuel filter and fuel pump with filter assembly to the No. 1 fuel sub-tank.

      Note

      Do not apply excessive force to the tube or No. 1 fuel suction support.

    6. A01RKDY

      Engage the clamp and claw, and connect the fuel pump filter hose while aligning it with the installation position of the No. 1 fuel sub-tank.

    7. Connect the fuel pump harness connector.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here