BATTERY COOLING FILTER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 HV BATTERY INTAKE FILTER

   
   

   1. Engage the 2 claws to temporarily install the No. 1 HV battery intake filter to the battery service hole cover.

   2. Engage the claw to install the No. 1 HV battery intake filter to the battery service hole cover.

2. INSTALL BATTERY SERVICE HOLE COVER

   
   

   1. Engage the 5 claws to install the battery service hole cover.

   2. Install the clip.

3. CLEAR DTC

   Tech Tips

   If the message "Maintenance requiredfor Traction battery cooling parts See owner's manual" is displayed on the multi-information display, clean or replace the No. 1 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.

   Click here