FUSE BOX INSTALLATION

PROCEDURE

1. INSTALL HYBRID BATTERY TERMINAL BLOCK

   CAUTION:

   Be sure to wear insulated gloves and protective goggles.

   
   

   1. Connect the 2 hybrid battery terminal block connectors.

      Note

      Make sure that the connectors are connected securely.

   2. 

      *a

      Pin

      Install the hybrid battery terminal block to the HV battery with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Make sure to align the hole of the hybrid battery terminal block with the pin.

2. INSTALL NO. 1 HV BATTERY SHIELD PANEL

   Click here

3. INSTALL UPPER NO. 1 HYBRID BATTERY COVER SUB-ASSEMBLY

   Click here

4. CONNECT FLOOR WIRE

   Click here

5. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT

   Click here

6. CONNECT FLOOR WIRE

   Click here

7. CONNECT HV FLOOR UNDER WIRE

   Click here

8. INSTALL NO. 1 HV BATTERY COVER PANEL RH

   Click here

9. INSTALL BATTERY COOLING BLOWER ASSEMBLY

   Click here

10. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

    Click here

11. INSTALL REAR UNDER COVER

    Click here

12. INSTALL REAR UNDER SIDE COVER LH

    Click here

13. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

14. INSTALL REAR UNDER SIDE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

15. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

16. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

17. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

18. INSTALL SERVICE PLUG GRIP

    Click here

19. PERFORM HIGH VOLTAGE FUSE ACCUMULATED LOAD HISTORY RESET

    Click here