ACCELERATOR PEDAL SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  2. REMOVE COWL SIDE TRIM BOARD LH (for LHD)

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  4. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. Type A:


      1. A01VD44

        Disconnect the accelerator pedal sensor assembly connector.

      2. Remove the 2 nuts and accelerator pedal sensor assembly.

        Note

        If the accelerator pedal sensor assembly has been struck or dropped, replace it.

    2. Type B:


      1. A01VBOC

        Disconnect the accelerator pedal sensor assembly connector.

      2. Remove the 3 nuts and accelerator pedal sensor assembly.

        Note

        If the accelerator pedal sensor assembly has been struck or dropped, replace it.

  7. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01VCPXC02
      *A Type A
      *B Type B

      Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 2 nuts and accelerator pedal sensor assembly.

      Note

      If the accelerator pedal sensor assembly has been struck or dropped, replace it.