MOTOR GENERATOR CONTROL SYSTEM, Diagnostic DTC:P06B01C, P06D61C, P0A1A47, P0A1A49, P1C2A1C, P1C2A49, P1C2B1C, P1C2B49, P1C601F, P1C621F, P313383, P313386, P313387, P313483, P313486, P313487

DTC Code DTC Name
P06B01C Generator Control Module Position Sensor REF Power Source Circuit Voltage Out of Range
P06D61C Generator Control Module Offset Power Circuit Voltage Out of Range
P0A1A47 Generator Control Module Watchdog / Safety μC Failure
P0A1A49 Generator Control Module Internal Electronic Failure
P1C2A1C Generator A/D Converter Circuit Circuit Voltage Out of Range
P1C2A49 Generator A/D Converter Circuit Internal Electronic Failure
P1C2B1C Drive Motor "A" Control Module A/D Converter Circuit Voltage Out of Range
P1C2B49 Drive Motor "A" Control Module A/D Converter Circuit Internal Electronic Failure
P1C601F Generator Control Module Position Sensor REF Power Source Circuit Intermittent
P1C621F Generator Control Module Offset Power Circuit Intermittent
P313383 Communication Error from Generator to Drive Motor "A" Value of Signal Protection Calculation Incorrect
P313386 Communication Error from Generator to Drive Motor "A" Signal Invalid
P313387 Communication Error from Generator to Drive Motor "A" Missing Message
P313483 Communication Error from Drive Motor "A" to Generator Value of Signal Protection Calculation Incorrect
P313486 Communication Error from Drive Motor "A" to Generator Signal Invalid
P313487 Communication Error from Drive Motor "A" to Generator Missing Message

DESCRIPTION

The motor generator control ECU (MG ECU), which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if it detects a malfunction. If any of the following DTCs are output, replace the inverter with converter assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P06B01C Generator Control Module Position Sensor REF Power Source Circuit Voltage Out of Range

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P06D61C Generator Control Module Offset Power Circuit Voltage Out of Range

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P0A1A47 Generator Control Module Watchdog / Safety μC Failure

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P0A1A49 Generator Control Module Internal Electronic Failure

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P1C2A1C Generator A/D Converter Circuit Circuit Voltage Out of Range

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P1C2A49 Generator A/D Converter Circuit Internal Electronic Failure

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P1C2B1C Drive Motor "A" Control Module A/D Converter Circuit Voltage Out of Range

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P1C2B49 Drive Motor "A" Control Module A/D Converter Circuit Internal Electronic Failure

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P1C601F Generator Control Module Position Sensor REF Power Source Circuit Intermittent

Motor generator control ECU internal malfunction detected when DTC P0C7917, P0D3319, P1C5D19 or P1C5F19 is stored.

(1 trip detection logic)

 Inverter with converter assembly Does not come on

Master Warning Light:

Does not come on
P1C621F Generator Control Module Offset Power Circuit Intermittent

Motor generator control ECU internal malfunction detected when DTC P0C7917, P0D3319, P1C5D19 or P1C5F19 is stored.

(1 trip detection logic)

 Inverter with converter assembly Does not come on

Master Warning Light:

Does not come on
P313383 Communication Error from Generator to Drive Motor "A" Value of Signal Protection Calculation Incorrect

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P313386 Communication Error from Generator to Drive Motor "A" Signal Invalid

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P313387 Communication Error from Generator to Drive Motor "A" Missing Message

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P313483 Communication Error from Drive Motor "A" to Generator Value of Signal Protection Calculation Incorrect

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P313486 Communication Error from Drive Motor "A" to Generator Signal Invalid

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
P313487 Communication Error from Drive Motor "A" to Generator Missing Message

Motor generator control ECU internal malfunction

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. With power switch on (IG) and wait for 15 seconds or more.

  7. Enter the following menus: Powertrain / Motor Generator / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.

PROCEDURE


  1. REFER TO REPLACE INVERTER WITH CONVERTER ASSEMBLY PARTS

    Click here

    Result
    Proceed to
    NEXT

    NEXT

    COMPLETED