THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE BODY ASSEMBLY


    1. B004P1VC05
      *a

      Component without harness connected

      (throttle body assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      C4-1 (M-) - C4-2 (M+) 25°C (77°F) 0.1 to 1.38 Ω

      If the result is not as specified, replace the throttle body assembly.