CAMSHAFT OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A01RIAC

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

      Note


      • Do not allow foreign matter to contact the oil seal surface of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    3. A01RKLCC01
      *1 O-ring

      Remove the O-ring from the camshaft timing oil control valve assembly.