2ZR-FXE ENGINE CONTROL SERVICE DATA

SPARK PLUG
Standard Insulation Resistance Spark plug (terminal part) - Body ground 10 MΩ or higher
Spark Plug Type DENSO made FC16HR-C9
Maximum Electrode Gap for Used Spark Plug 1.1 mm (0.0433 in.)
Standard Electrode Gap for New Spark Plug 0.8 to 0.9 mm (0.0315 to 0.0354 in.)
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
Standard Resistance 20°C (68°F) 6.9 to 7.9 Ω
THROTTLE BODY ASSEMBLY
Standard Resistance 1 (M-) - 2 (M+) 25°C (77°F) 0.1 to 1.38 Ω
MASS AIR FLOW METER SUB-ASSEMBLY
Standard Resistance 4 (THA) - 5 (E2) -20°C (-4°F) 12.5 to 16.9 kΩ
20°C (68°F) 2.19 to 2.67 kΩ
60°C (140°F) 0.50 to 0.68 kΩ
CRANKSHAFT POSITION SENSOR
Standard Resistance

Cold

(-10 to 50°C (14 to 122°F))

 1630 to 2740 Ω

Hot

(50 to 100°C (122 to 212°F))

 2065 to 3225 Ω
ENGINE COOLANT TEMPERATURE SENSOR
Standard Resistance 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
NO. 2 ENGINE COOLANT TEMPERATURE SENSOR
Standard Resistance 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
KNOCK CONTROL SENSOR
Standard Resistance 20°C (68°F) 120 to 280 kΩ
AIR FUEL RATIO SENSOR
Standard Resistance 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher
HEATED OXYGEN SENSOR
Standard Resistance 1 (HT1B) - 2 (+B) 20°C (68°F) 5 to 10 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher
CIRCUIT OPENING RELAY ASSEMBLY (C/OPN)
Standard Resistance 3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω
WATER PUMP RELAY (ENG W/PMP)
Standard Resistance 3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω