BLACK OUT TAPE(for Rear Door) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.

   Click here

2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

   Click here

3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

6. REMOVE REAR DOOR TRIM COVER LH

   Click here

7. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH

   Click here

8. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

   Click here

9. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

   Click here

10. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH

    Click here

11. REMOVE REAR DOOR ARMREST SET BRACKET LH

    Click here

12. REMOVE REAR DOOR SERVICE HOLE COVER LH

    Click here

13. REMOVE REAR DOOR GLASS RUN LH

    Click here

14. REMOVE REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH

    Click here

15. REMOVE REAR DOOR REAR GUIDE SEAL LH

    Click here

16. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH

    Click here

17. DISCONNECT REAR DOOR CHECK ASSEMBLY LH

    
    

    1. 

       Remove the bolt and disconnect the rear door check assembly LH.

18. REMOVE REAR DOOR WEATHERSTRIP LH

    Click here

19. REMOVE REAR DOOR FRAME GARNISH LH

    Click here

20. REMOVE REAR DOOR BELT MOULDING ASSEMBLY LH

    Click here

21. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING LH

    Click here

22. REMOVE REAR DOOR UPPER WINDOW FRAME MOULDING LH

    Click here

23. REMOVE REAR DOOR REAR WINDOW FRAME MOULDING LH

    Click here

24. REMOVE NO. 1 BLACK OUT TAPE LH

    Tech Tips

    When removing the No. 1 black out tape LH, heat the rear door panel and No. 1 black out tape LH using a heat light.

    Standard
    Item Temperature Rear Door Panel 40 to 60°C (104 to 140°F) No. 1 Black Out Tape LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door panel or No. 1 black out tape LH excessively.

    
    

    1. 

       Pull back an edge of the No. 1 black out tape LH and pull it parallel to the rear door panel to remove it.

25. REMOVE NO. 2 BLACK OUT TAPE LH

    Tech Tips

    When removing the No. 2 black out tape LH, heat the rear door panel and No. 2 black out tape LH using a heat light.

    Standard
    Item Temperature Rear Door Panel 40 to 60°C (104 to 140°F) No. 2 Black Out Tape LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door panel or No. 2 black out tape LH excessively.

    
    

    1. 

       Pull back an edge of the No. 2 black out tape LH and pull it parallel to the rear door panel to remove it.

26. REMOVE NO. 3 BLACK OUT TAPE LH

    Tech Tips

    When removing the No. 3 black out tape LH, heat the rear door panel and No. 3 black out tape LH using a heat light.

    Standard
    Item Temperature Rear Door Panel 40 to 60°C (104 to 140°F) No. 3 Black Out Tape LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door panel or No. 3 black out tape LH excessively.

    
    

    1. 

       Pull back an edge of the No. 3 black out tape LH and pull it parallel to the rear door panel to remove it.