CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
PRECAUTION
Note
After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.
REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)
REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)
REMOVE DECK FLOOR BOX LH (w/ Spare Tire)
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
REMOVE FRONT DOOR TRIM COVER LH
REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH
REMOVE FRONT DOOR ARMREST SET BRACKET LH
REMOVE FRONT DOOR SERVICE HOLE COVER LH
REMOVE FRONT DOOR GLASS RUN LH
REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH
REMOVE FRONT DOOR BELT MOULDING ASSEMBLY LH
REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY
REMOVE FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY LH
DISCONNECT FRONT DOOR CHECK ASSEMBLY LH
Remove the bolt and disconnect the front door check assembly LH.
REMOVE FRONT DOOR WEATHERSTRIP LH
REMOVE UPPER DOOR FRAME GARNISH LH
REMOVE FRONT DOOR FIX WINDOW GLASS LH
REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING LH
REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH
REMOVE NO. 3 BLACK OUT TAPE LH
Tech Tips
When removing the No. 3 black out tape LH, heat the front door panel and No. 3 black out tape LH using a heat light.
| Standard | ||||||
|---|---|---|---|---|---|---|
|
Note
Do not heat the front door panel or No. 3 black out tape LH excessively.
Pull back an edge of the No. 3 black out tape LH and pull it parallel to the front door panel to remove it.
REMOVE NO. 2 BLACK OUT TAPE LH
Tech Tips
When removing the No. 2 black out tape LH, heat the front door panel and No. 2 black out tape LH using a heat light.
| Standard | ||||||
|---|---|---|---|---|---|---|
|
Note
Do not heat the front door panel or No. 2 black out tape LH excessively.
Pull back an edge of the No. 2 black out tape LH and pull it parallel to the front door panel to remove it.
REMOVE NO. 1 BLACK OUT TAPE LH
Tech Tips
When removing the No. 1 black out tape LH, heat the front door panel and No. 1 black out tape LH using a heat light.
| Standard | ||||||
|---|---|---|---|---|---|---|
|
Note
Do not heat the front door panel or No. 1 black out tape LH excessively.
Pull back an edge of the No. 1 black out tape LH and pull it parallel to the front door panel to remove it.