RADIATOR GRILLE(except Sport Package) INSTALLATION

PROCEDURE

1. INSTALL RADIATOR GRILLE ASSEMBLY

   
   

   1. Attach the 20 claws and 4 guides to install the radiator grille assembly.

   2. Install the 2 outside moulding retainers.

   3. Install the 9 screws.

      

      Screw

      Outside Moulding Retainer

2. INSTALL HOOD TO FRONT END PANEL SEAL

   Click here

3. INSTALL CLEARANCE LIGHT ASSEMBLY LH

   
   

   1. for LED Type Turn Signal Light:

      Click here

   2. for Bulb Type Turn Signal Light:

      Click here

4. INSTALL CLEARANCE LIGHT ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

5. INSTALL NO. 3 ENGINE ROOM WIRE

   Click here

6. INSTALL FRONT BUMPER ASSEMBLY

   Click here

7. ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

   Click here

   Tech Tips

   When only the radiator grille assembly is removed and reinstalled, it is not necessary to adjust the front television camera assembly (Such as when removing or installing the radiator grille in order to remove or install the headlight assembly).

8. PERFORM CALIBRATION (w/ Intelligent Clearance Sonar System)

   Click here

9. PERFORM CALIBRATION (w/o Intelligent Clearance Sonar System)

   Click here