REAR SPOILER REASSEMBLY

PROCEDURE


  1. INSTALL PACKING


    1. Install 3 new packings.

  2. INSTALL REAR SPOILER NO. 2 PROTECTOR

    Tech Tips

    When installing the rear spoiler No. 2 protector, heat the rear spoiler assembly using a heat light.

    Standard
    Item Temperature
    Rear Spoiler Assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear spoiler assembly excessively.


    1. Clean the rear spoiler assembly surface.


      1. Using a heat light, heat the rear spoiler assembly surface.

      2. Remove the double-sided tape from the rear spoiler assembly.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install 2 new rear spoiler No. 2 protectors.


      1. Using a heat light, heat the rear spoiler assembly.

      2. Remove the peeling paper from the face of the rear spoiler No. 2 protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the 2 rear spoiler No. 2 protectors as shown in the illustration.

        Tech Tips

        Press the rear spoiler No. 2 protector firmly to install it.

        A01CPM2

  3. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here