FRONT BUMPER(for Sport Package) REMOVAL

CAUTION / NOTICE / HINT

w/ Dynamic Radar Cruise Control System:

Tech Tips

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here

PROCEDURE


  1. PRECAUTION (w/ Panoramic View Monitor System)

    Click here

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. B002KRF

      Remove the 10 clips and radiator support opening cover.

  3. REMOVE RADIATOR GRILLE PROTECTOR


    1. B002JO1

      Remove the 2 radiator grille protectors.

  4. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH (for Front Fender)

    Click here

  5. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH (for Front Fender)

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE NO. 1 MOULDING TAPE (for Front Fender)

    Click here

  7. REMOVE NO. 2 MOULDING TAPE (for Front Fender)

    Click here

  8. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH


    1. B002JYQ

      Remove the 5 screws and front fender front splash shield LH.

  9. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE FRONT BUMPER ASSEMBLY


    1. B002JJ3

      Remove the 6 screws.

    2. B002H47C02
      B002JLO Protective Tape

      Put protective tape around the front bumper cover.

    3. B002JVK

      Remove the 2 clips.

    4. B002JIH

      Remove the 2 bolts.

    5. Detach the 10 claws and remove the front bumper assembly.

      B002III

    6. w/ Headlight Cleaner System:


      1. Disconnect the headlight washer hose, and then drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    7. w/ Fog Light:

      Disconnect the 2 fog light connectors.

    8. Disconnect the 2 clearance light connectors.

    9. w/ LEXUS Parking Assist-sensor System:

      Disconnect the 2 No. 3 engine room wire connectors.

    10. w/o LEXUS Parking Assist-sensor System

      Disconnect the No. 3 engine room wire connector.

  11. REMOVE FRONT BUMPER ENERGY ABSORBER

    Click here

  12. REMOVE FRONT BUMPER LOWER ABSORBER

    Click here

  13. REMOVE LOWER RADIATOR AIR GUIDE PLATE

    Click here

  14. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    Click here

  15. REMOVE FRONT BUMPER SIDE RETAINER LH

    Click here

  16. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.