REAR BUMPER INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER SIDE SUPPORT LH

   
   

   1. Attach the 3 claws to install the rear bumper side support LH.

   2. Install the clip.

   3. Install the screw.

2. INSTALL REAR BUMPER SIDE SUPPORT RH

   Tech Tips

   Use the same procedure as for the LH side.

3. INSTALL REAR BUMPER SIDE SEAL LH

   
   

   1. Install the rear bumper side seal LH with 2 new grommets.

4. INSTALL REAR BUMPER SIDE SEAL RH

   Tech Tips

   Use the same procedure as for the LH side.

5. INSTALL REAR BUMPER NO. 1 REINFORCEMENT

   
   

   1. Install the rear bumper No. 1 reinforcement with the 8 bolts.

      Torque:

      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

6. INSTALL REAR BUMPER COVER

   
   

   1. Attach the 16 claws to install the rear bumper cover.

   2. Install the 2 screws.

   3. Install the 4 screws.

   4. Install the 2 clips.

7. INSTALL REAR BUMPER NO. 1 PLATE

   
   

   1. Attach the 2 claws to install the rear bumper No. 1 plate.

      Tech Tips

      Use the same procedure for all rear bumper No. 1 plates.

8. INSTALL REAR FLOOR SIDE MEMBER COVER

   
   

   1. Install the rear floor side member cover with the 8 clips.

9. INSTALL NO. 5 MOULDING TAPE

   Click here

10. INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

    Click here

11. INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.