VEHICLE APPROACHING SPEAKER ECU INSTALLATION

PROCEDURE

1. INSTALL VEHICLE APPROACHING SPEAKER CONTROLLER

   
   

   1. Connect the connector.

   2. Attach the hook to install the vehicle approaching speaker controller.

   3. Install the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSTALL ECU INTEGRATION BOX RH

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

7. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

8. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

   Click here