VEHICLE APPROACHING SPEAKER ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  8. REMOVE ECU INTEGRATION BOX RH

    Click here

  9. REMOVE VEHICLE APPROACHING SPEAKER CONTROLLER


    1. B002IS8C02
      B002HVY Bolt
      B002I10 Connector

      Remove the bolt.

    2. Detach the hook and remove the vehicle approaching speaker controller.

    3. Disconnect the connector.