STOP LIGHT CONTROL RELAY(for LHD) INSTALLATION

PROCEDURE

1. INSTALL STOP LIGHT CONTROL ECU ASSEMBLY

   
   

   1. Attach the clamp to install the stop light control ECU assembly.

   2. Connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

   Click here

5. INSTALL REAR CONSOLE ARMREST ASSEMBLY

   Click here

6. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

7. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

8. INSTALL COWL SIDE TRIM BOARD LH

   Click here

9. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

   Click here