STOP LIGHT SWITCH REMOVAL

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  2. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. for LHD:


      1. B002HMW

        Disconnect the connector.

      2. B002K7EC02
        *1 Lock Nut

        Loosen the lock nut.

      3. Turn the stop light switch assembly counterclockwise and remove it.

    2. B002I77

      for RHD:


      1. Disconnect the connector.

      2. Turn the stop light switch assembly counterclockwise and remove it.

  5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER (for RHD)


    1. B002JU5C01
      B002JLO Protective Tape

      Using a screwdriver, detach the 2 claws and remove the stop light switch mounting adjuster.

      Note

      The stop light switch mounting adjuster must not be reused.

      Tech Tips

      Tape the screwdriver tip before use.