HEADLIGHT DIMMER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

   
   

   1. Attach the 2 claws to install the headlight dimmer switch assembly.

   2. Connect the connector.

2. INSTALL TILT AND TELESCOPIC SWITCH (for Headlight Dimmer Switch LH Side Type, for Power Tilt and Power Telescopic Steering Column)

   Click here

3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

   Click here

4. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

   
   

   1. Connect the auxiliary battery negative (-) terminal and tighten the nut.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. w/o Spare Tire:

      Attach the 2 claws to install the battery service cover.

6. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

7. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

8. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

   Click here

9. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

10. CHECK SRS WARNING LIGHT

    Click here