BACK-UP LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK-UP LIGHT BULB


    1. B002K9M

      Detach the 2 claws and remove the rear light service hole cover.

    2. B002J1OC01
      *1 Matchmark
      *2 Unlock Position Mark
      B002HVY Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    3. B002IFW

      Remove the back-up light bulb from the bulb socket.

  2. INSTALL BACK-UP LIGHT BULB


    1. B002HZ9

      Install the back-up light bulb to the bulb socket.

    2. B002J41C01
      *1 Matchmark
      *2 Unlock Position Mark
      *3 Lock Position Mark
      B002HVY Clockwise

      Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

  3. INSPECT BACK-UP LIGHT

    Click here