REAR LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT SOCKET AND WIRE LH


    1. w/o Rear Fog Light:


      1. Attach the 2 wire harness clamps to install the rear light socket and wire LH.

      2. Connect the connector.

    2. w/ Rear Fog Light:


      1. Attach the 2 wire harness clamps to install the rear light socket and wire LH.

      2. Connect the 2 connectors.

  2. INSTALL REAR LIGHT GASKET LH


    1. Install a new rear light gasket LH.

  3. INSTALL BACK-UP LIGHT BULB


    1. B002HZ9

      Install the back-up light bulb to the bulb socket.

    2. B002IXEC01
      *1 Matchmark
      *2 Unlock Position Mark
      *3 Lock Position Mark
      B002HVY Clockwise

      Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.