REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. B002KAQC05
      *a

      Component without harness connected

      (Rear Combination Light assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 1 (TRN)

      Negative (-) → 4 (E)

      		 Turn Signal light illuminates

      Positive (+) → 2 (STP)

      Negative (-) → 4 (E)

      		 Stop light illuminates

      Positive (+) → 3 (B)

      Negative (-) → 4 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. B002KAQC06
      *a

      Component without harness connected

      (Rear Combination Light assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 1 (TRN)

      Negative (-) → 4 (E)

      		 Turn Signal light illuminates

      Positive (+) → 2 (STP)

      Negative (-) → 4 (E)

      		 Stop light illuminates

      Positive (+) → 3 (B)

      Negative (-) → 4 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly RH.