REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. B002KVMC01
      *1 Matchmark
      *2 Unlock Position Mark
      B002HVY Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B002H9S

      Remove the rear turn signal light bulb from the bulb socket.

  2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. B002H50C01
      *1 Matchmark
      *2 Unlock Position Mark
      B002HVY Counterclockwise

      Turn the connector cap counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the connector cap.

    2. B002HZE

      Disconnect the connector.

    3. B002KMG

      Detach the 2 wire harness clamps and remove the rear combination light socket and wire sub-assembly LH.