SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION (w/ Panoramic View Monitor System)

    Click here

  2. REMOVE OUTER MIRROR LH

    Click here

  3. REMOVE OUTER MIRROR COVER LH


    1. B002HD8

      Detach the 6 claws and 2 guides and remove the outer mirror cover LH.

  4. REMOVE OUTER MIRROR BEZEL LH


    1. B002IT8

      Remove the screw.

    2. Detach the 5 claws and guide and outer mirror bezel LH.

  5. REMOVE LOWER OUTER MIRROR COVER LH


    1. B002IKG

      w/ Panoramic View Monitor System:

      Disconnect the connector and detach the wire harness clamp.

    2. B002HZU

      Remove the screw.

    3. Detach the claw and 2 guides and lower outer mirror cover LH.

  6. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. B002KJ8

      Detach the 2 claws and remove the side turn signal light assembly LH.

    2. B002HCM

      Disconnect the connector.