CLEARANCE LIGHT ASSEMBLY(for LED Type Turn Signal Light) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    for Standard:

    Click here

    for Sport Package:

    Click here

  2. REMOVE CLEARANCE LIGHT ASSEMBLY LH


    1. w/ Headlight Cleaner System:


      1. B002KX0

        Detach the claw and disconnect the headlight cleaner hose.

      2. Detach the hose clamp.

    2. B002KTE

      Detach the 2 wire harness clamps.

    3. Remove the clip and 3 screws.

    4. B002H1Y

      Detach the 2 claws and remove the clearance light assembly LH.