LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the headlight dimmer switch is in the AUTO position. Normal 0:Normal,1:Long Main body ECU (Multiplex network body ECU)
        Disp Ex ON Sen Sets the display light (meter, audio, etc.) dim starting level.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (Multiplex network body ECU)
        Disp Ex OFF Sen Sets the display light (meter, audio, etc.) dim return level.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (Multiplex network body ECU)
        Light Auto OFF Delay Keep the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.*1 30 s 00:OFF,01:30 s,10:60 s,11:90 s
        Sensitivity Adjusts the ambient light sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main body ECU (Multiplex network body ECU)
        DRL Function ON/OFF of the DRL function*2 ON 0:OFF,1:ON
        Follow Me Home Lighting Time Changes the low beam headlight lighting time when power switch off and headlight dimmer switch is pulled to flash headlights once.*. 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main body ECU (Multiplex network body ECU)
        Light up Clearance Lights at Door Unlock Function Turns on the clearance lights, taillights and the license plate lights for 15 seconds when the doors are unlocked by the entry key or the wireless key. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        • *1: Vehicles displaying the Item "Light Auto OFF Delay" on the GTS

        • *2: Vehicles displaying the Item "DRL Function" on the GTS

        • *3: w/ Follow Me Home System


        Warning
        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Setting Function to change the lane change flashing times. 3 000:OFF,001:3,010:4,011:5,100:6,101:7 Combination meter assembly

        *: w/ Follow Me Home System

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A

        B002HCQE04

        Tech Tips

        When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

        *B

        B002HCQE04

        Tech Tips

        When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

        *C

        B002HCQE06

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

    2. Customizing with Multi-display.


      1. Turn the power switch on (IG).

      2. Enter the following menus: Setup / Vehicle Customization / Lights Settings.

      3. Select the setting by referring to the table below.

        Lights Settings
        Tester Display Description Default Setting ECU
        Light Sensor sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main body ECU (multiplex network body ECU)
        Headlamps Auto-Off Timer*1 Keeps the headlights on for a certain period of time after turning the power switch off and closing all of doors with the low beam headlights on. 30 sec. Off, 30 sec., 60 sec. or 90 sec. Main body ECU (multiplex network body ECU)
        Daytime Running Lights*2 Turns the DRL function on/off. On On or Off Main body ECU (multiplex network body ECU)

        • *1: Vehicles displaying the Item "Headlamps Auto-Off Timer" on the multi-information display

        • *2: Vehicles displaying the Item "Daytime Running Lights" on the multi-information display

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A

        B002HCQE05
        *a System Setting
        *b Dark
        *c Light
        *d Setting

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.