LIGHTING SYSTEM SYSTEM DESCRIPTION


  1. AUTOMATIC LIGHT CONTROL SYSTEM


    1. When the headlight dimmer switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the headlights, taillights, front fog lights*, clearance lights and license plate lights.


      • *: w/ Front Fog Light


    • *1: w/ Front Fog Light

    • *2: w/ Rear Fog Light

    LIGHT AUTO TURN-OFF SYSTEM (for Door-linked Light Auto Turn-off System)


    1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights or license plate lights on. When all of the following conditions are met, the exterior lights turn off:


      • The headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights, or license plate lights are on.

      • The power switch is turned from on (IG) to off.

      • The driver door is opened.

  3. LIGHT AUTO TURN-OFF SYSTEM (except Door-linked Light Auto Turn-off System)


    • *1: w/ Front Fog Light

    • *2: w/ Rear Fog Light


    1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights or license plate lights on.

      Switch Condition Outline
      Headlight dimmer switch in AUTO position While the lights (headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights or license plate lights) are turned on, this control automatically turns them off when the power switch is turned from on (IG) to off.
      Headlight dimmer switch in tail or head position While the lights (headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights or license plate lights) are turned on, this control automatically turns off only headlights and the front fog lights*1 when the power switch is turned from on (IG) to off.

  4. LIGHT AUTO TURN-OFF SYSTEM (w/ Delay Function)


    1. The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, front fog lights, taillights, clearance lights and license plate lights).


      • This system has the following functions.

      Function Outline
      Delay Function

      The exterior lights automatically turn off after 30 seconds when all of the following conditions are met:


      • The engine switch is turned from on (IG) to off.

      • The low beam headlights are on.

      • All doors are closed after any of the doors are opened.
      Door Control Transmitter-linked Function

      The exterior lights turn off immediately when the delay function is active and the following condition is met:


      • The lock button on the key is pushed after all doors are locked.
      Door Open-linked

      The exterior lights automatically turn off immediately when all of the following conditions are met:


      • The engine switch is turned from on (IG) to off.

      • The taillights are on. (The low beam headlights are off.)

      • The driver door is opened.

  5. DAYTIME RUNNING LIGHT SYSTEM


    1. The daytime running light system is designed to automatically illuminate the clearance lights (high intensity parking lights), during the daytime to make the car more visible to other vehicles.


      • The main body ECU (multiplex network body ECU) controls this system.

      • This system is enabled when the conditions below are met:


        • The power switch is on (IG).


        • READY condition is received.


        • Parking brake is released.


        • Headlight dimmer switch is in the off or AUTO position (and the low beam headlights are not turned on via the automatic light control system).


        • When the turn signal light or hazard warning lights are illuminated, the daytime running light of the flashing light turns off. The daytime running light turns on again after the turn signal light or hazard warning lights are turned off.

  6. FOLLOW ME HOME SYSTEM (w/ Follow Me Home System)


    1. The follow me home system is designed to illuminate the low beam headlights for a certain period of time after the vehicle is parked.


      1. This system is controlled by the main body ECU (multiplex network body ECU).

      2. This system is enabled when the following conditions are met:


        • The power switch is off.

        • The headlight dimmer switch is in the off or AUTO position.

        • The headlight dimmer switch is pulled to flash the headlights once.

  7. LANE CHANGE FLASHER SYSTEM


    • When moving the headlight dimmer switch (turn signal switch) to the lane change position (it is not necessary to hold the switch) during a lane change, the turn signal light flashes a specified number of times.

    • While the turn signal light is flashing after the headlight dimmer switch (turn signal switch) is moved to the lane change position (it is not necessary to hold the switch), the turn signal light turns off if the headlight dimmer switch (turn signal switch) is moved in the opposite direction.

    • The combination meter controls this system.

  8. EMERGENCY BRAKE SIGNAL (w/ Emergency Brake Signal)


    1. During emergency braking, the emergency brake signal flashes the hazard warning lights to alert other drivers and reduce the possibility of a rear-end collision.

  9. WELCOME LIGHT ILLUMINATION CONTROL


    1. When a wireless door unlock operation or entry door unlock operation is performed at nighttime, the taillights, clearance lights and license plate lights illuminate for approximately 15 seconds.