WIPER ECU INSTALLATION

PROCEDURE

1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (for RHD)

   
   

   1. Attach the 2 claws to install the windshield wiper relay assembly.

2. INSTALL ECU INTEGRATION BOX RH (for RHD)

   Click here

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (for RHD)

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

7. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for RHD)

   Click here

8. INSTALL UPPER REAR CONSOLE PANEL (for RHD)

   Click here

9. INSTALL CONSOLE ARMREST ASSEMBLY (for RHD)

   Click here

10. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

11. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

12. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (for LHD)

    
    

    1. Attach the 2 claws to install the windshield wiper relay assembly.

13. INSTALL ECU INTEGRATION BOX RH (for LHD)

    Click here

14. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

15. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

16. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

17. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

18. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

19. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here