WIPER ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time maybe required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.

    Click here

  2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  8. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

  9. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY (for LHD)


    1. B002JT9

      Detach the 2 claws and remove the windshield wiper relay assembly.

  10. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  11. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  12. REMOVE CONSOLE ARMREST ASSEMBLY (for RHD)

    Click here

  13. REMOVE UPPER REAR CONSOLE PANEL (for RHD)

    Click here

  14. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for RHD)

    Click here

  15. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

  16. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (for RHD)

    Click here

  17. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  18. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

    Click here

  19. REMOVE ECU INTEGRATION BOX RH (for RHD)

    Click here

  20. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY (for RHD)


    1. B002JSM

      Detach the 2 claws and remove the windshield wiper relay assembly.