WASHER LEVEL WARNING SWITCH INSTALLATION

PROCEDURE

1. INSTALL LEVEL WARNING SWITCH ASSEMBLY

   
   
   1. 

      *a	Protrusion
      *b	Marking

      Install the level warning switch assembly as shown in the illustration.

      Note

      Make sure that the protrusion of the level warning switch assembly is between the 2 markings.

   2. Connect the connector.

2. FILL UP WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

   
   

   1. Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

3. INSTALL FRONT FENDER LINER RH

   Click here

4. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

   Click here

5. INSTALL NO. 1 MOULDING TAPE

   Tech Tips

   Use the same procedure described for the LH side.

   Click here

6. INSTALL NO. 2 MOULDING TAPE

   Tech Tips

   Use the same procedure described for the LH side.

   Click here

7. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

   Click here

8. INSTALL FRONT WHEEL RH

   Click here