WIPER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.


  • The procedure listed below is for LHD vehicles.


  • Use the same procedure for the RH and LH sides.


  • The procedure listed below is for the RH side.

PROCEDURE


  1. INSTALL TILT AND TELESCOPIC SWITCH (for RHD, for Power Tilt and Power Telescopic Steering Column, for LH Side)


    1. Attach the claw and install the tilt and telescopic switch to the windshield wiper switch assembly.

  2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Attach the claw to install the windshield wiper switch assembly.

    2. Connect each connector.

  3. INSTALL UPPER STEERING COLUMN COVER


    1. Attach the claw and install the upper steering column cover.

    2. Attach the 4 clips and 2 guides to connect the instrument cluster finish panel cover to the upper steering column cover.

  4. INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Note

    If the lower steering column cover is installed in the incorrect order, the parts may break.


    1. Attach the 3 claws and 4 guides to install the lower steering column cover.

    2. Turn the steering wheel assembly to the left and install the screw.

    3. Turn the steering wheel assembly to the right and install the lower steering column cover with the screw.

  5. INSTALL LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

    Note

    If the lower steering column cover is installed in the incorrect order, the parts may break.


    1. Attach the 2 claws and 4 guides to install the lower steering column cover.

    2. Install the screw.

    3. Turn the steering wheel assembly to the left and install the screw.

    4. Turn the steering wheel assembly to the right and install the lower steering column cover with the screw.

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for Power Tilt and Power Telescopic Steering Column)

    Note


    • Reset the auto away/return function setting to the previous condition by changing the customize parameter

      Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected

      Click here

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for Manual Tilt and Manual Telescopic Steering Column)

    Click here

  8. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

    Click here

  9. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  10. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Spare Tire)

    Click here