FRONT WIPER RUBBER REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.


  • The procedure listed below is for LHD vehicles.


  • Use the same procedure for the RH and LH sides.


  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WIPER BLADE LH


    1. A01CRELC02
      *a Lock Button

      Push the lock button of the front wiper blade LH to release the lock.

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.

  2. REMOVE WIPER RUBBER LH


    1. A01CRHMC01
      *a Slit

      Pull the wiper rubber LH in the direction indicated by the arrow shown in the illustration.

    2. Pull the front wiper rubber from the slit of the front wiper blade LH to remove it.

      Tech Tips

      The wiper rubber can be removed from either end of the front wiper blade LH.

  3. INSTALL WIPER RUBBER LH


    1. A01CPDFC01
      *a Slit
      *b Cap

      Install the front wiper rubber through the slit of the front wiper blade LH.

      Tech Tips

      The wiper rubber can be installed from either end of the front wiper blade LH.

    2. Pull the wiper rubber LH in the direction indicated by the arrow shown in the illustration so that it fits into the cap of the front front wiper blade LH.

      Note

      Make sure that the wiper rubber LH is fitted securely into the cap and cannot be removed.

  4. INSTALL FRONT WIPER BLADE LH

    A01CPBPC01
    *a Front Wiper Arm Protrusion *b Front Wiper Blade Indentation
    *c Lock Button - -

    1. Align the protrusion of the front wiper arm LH with the indentation of the front wiper blade LH and lower the front wiper arm LH.

    2. Slide the front wiper blade LH until the lock button is locked to install the front wiper blade LH.

      Note

      Make sure that the lock button locks so that it is installed securely.