REAR WIPER MOTOR REMOVAL

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door)

    Click here

  5. REMOVE PULL HANDLE (w/ Power Back Door)

    Click here

  6. REMOVE BACK DOOR FINISH COVER LH (w/o Power Back Door)

    Click here

  7. REMOVE BACK DOOR FINISH COVER RH (w/o Power Back Door)

    Click here

  8. REMOVE BACK DOOR LOCK COVER (w/ Power Back Door)

    Click here

  9. REMOVE BACK DOOR LOCK COVER (w/o Power Back Door)

    Click here

  10. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  11. REMOVE REAR WIPER ARM HEAD CAP


    1. B002JTL

      Detach the 2 claws and open the rear wiper arm head cap as shown in the illustration.

    2. B002HOC

      Detach the 2 claws and remove the rear wiper arm head cap.

  12. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. B002KJ7

      Remove the nut and the rear wiper arm and blade assembly.

  13. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. B002IQO

      Disconnect the connector.

    2. Loosen the 3 bolts and rear wiper motor assembly.

  14. REMOVE REAR WIPER MOTOR GROMMET


    1. B002HRE

      Remove the rear wiper motor grommet.