BACK DOOR CLOSER ECU INSTALLATION

PROCEDURE

1. INSTALL MULTIPLEX NETWORK DOOR ECU

   
   

   1. Attach the guide and clamp to install the multiplex network door ECU.

   2. Install the 2 bolts.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

   3. Connect the 2 connectors.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

3. INSTALL BACK DOOR LOCK COVER

   Click here

4. INSTALL PULL HANDLE

   Click here

5. INSTALL BACK DOOR TRIM BASE

   Click here

6. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

7. INSTALL BACK DOOR SIDE GARNISH RH

   Click here

8. INSTALL BACK DOOR CENTER GARNISH

   Click here

9. INSPECT POWER BACK DOOR SYSTEM

   Click here