POWER BACK DOOR TOUCH SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BASE

    Click here

  5. REMOVE PULL HANDLE

    Click here

  6. REMOVE BACK DOOR LOCK COVER

    Click here

  7. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  8. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH


    1. B002J8D

      Disconnect the connector.

    2. B002HKK

      Remove the 4 screws.

    3. Detach the 2 clips and remove the power back door sensor assembly LH.